IBIS Quality Teleconference
April 8, 2003

TIME AND PHONE FOR NEXT MEETING
April 22, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-974-8478 or 800-249-5618
Meeting access: CONFERENCE SERVER 1, Conference ID: 54644

ROLL CALL
Adam Tambone adamt@maine.rr.com
*Barry Katz bkatz@sisoft.com
Benjamin P Silva benjamin.p.silva@intel.com
Bob Ross bob@teraspeed.com
*Brian Arsenault arsenault_brian@emc.com
*Eckhard Lenski Eckhard.Lenski@siemens.com
Eric Brock ebrock@sisoft.com
Gregory R Edlund gedlund@us.ibm.com
Hazem Hegazy hazem_hegazy@mentorg.com
John Figueroa jfigueroa@apple.com
Katja Koller Katja.Koller@siemens.com
Kevin Fisher kfisher@sisoft.com
*Kim Helliwell kimgh@apple.com
Lance Wang lwang@cadence.com
Lynne Green lgreen@cadence.com
*Mike Labonte milabont@cisco.com
Peter LaFlamme plaflamm@amcc.com
*Robert Haller rhaller@sisoft.com
Roy Leventhal Roy_Leventhal@3com.com
Sherif Hammad sherif_hammad@mentorg.com
*Todd Westerhoff twesterh@cisco.com
Tom Dagostino tom@teraspeed.com
*Kazuyoshi Shoji kshohji@hitachi-ul.co.jp
*Sadahiro Nonoyama nonoyama@hitachi-ul.co.jp

Everyone in attendance marked by  *

NOTE: "AR" = Action Required.

-----------------------MINUTES ---------------------------

Barry Katz chaired the meeting.

- Review of minutes for March 25, 2003
       	Minutes approved with minor editor changes requested
	by Eckhard

- Announcements
        	EIA Call for Patent Disclosure
         No company declared a patent.

       	Tentatively IBIS summit at DesignCon East
       	June 23rd 2003, Location Marlboro MA

- AR Review
      	NONE

- Opens for new items
	No new items

- Detailed Documentation review

The latest component_section.txt is needs to be put up on the web site.
Barry continued to review the updated documentation he wrote for the
Component section of the IBIS Quality checklist. The intention of level 
2a is correlation to simulation (not necessarily spice). For a package 
model this means correlation to a field solver. Level 2b is correlation 
to bench. There are techniques and/or references in IBIS accuracy handbook.

AR - Barry and Bob update and post component section.

We walked through Model section document. Lynne informed Bob that she 
would not be able to attend, and we agreed to either provide updates or 
update the document. The first part of the document is duplication from 
the IQ_2_0_general_header.txt and will be removed.  The diff pin section 
is already covered in the component section and will be removed. Table 
of check of model_type vs IV curves should be added. Ccomp was reworded, 
and additional recommendations to add Ccomp Input versus Output if 
significantly different (as comments). Need to add level checks for Ccomp.

AR: Kim to obtain range of Ccomp values IBIS parser checks.

IBIS 4.0 allows Ccomp to be specified for power and gnd clamps,pullup 
and pulldowns. So Ccomp can be handled and checked more elegantly with 
models conforming to IBIS 4.0 specification.  This needs to be added to 
the documentation.

We neglected to inform the distribution list about Daylight savings time .

- Need to add model section file header.
FILENAME: IQ_4_0_model_section.txt
Rev 0.1  4/08/03 Draft Release LG

- Plans for next meeting
     Continue review of model_section.txt
     On deck - review of IV_curves.txt
- Schedule for next meeting

April 22, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-974-8478 or 800-249-5618
Meeting access: CONFERENCE SERVER 1, Conference ID: 54644

Meeting ended at 10:00 AM Eastern Time.


